GPO-3 (UPGM203) Papa Laminated Moena Aniani Polyester Unsaturated
ʻO ka GPO-3 Molded Sheet (i kapa ʻia hoʻi ʻo GPO3, UPGM203) he moena aniani alkali-free i hoʻopiha ʻia a hoʻopaʻa ʻia me ka resin polyester unsaturated, a laminated ma lalo o ke kiʻekiʻe o ka mahana a me ke kaomi kiʻekiʻe i loko o ka mold. Loaʻa iā ia ka machinability maikaʻi, ka ikaika mechanical kiʻekiʻe, nā waiwai dielectric maikaʻi, ke kūpaʻa tracking hōʻoia maikaʻi loa a me ke kūpaʻa arc. Loaʻa iā ia ka palapala hōʻoia UL a ua hala i ka hoʻāʻo o REACH a me RoHS, a pēlā aku. Ua kapa ʻia hoʻi ʻo ia he GPO-3 a i ʻole GPO3 sheet, GPO-3 a i ʻole GPO3 insulation board.
He kūpono ia no ka hana ʻana i nā ʻāpana kūkulu insulation a me nā ʻāpana kākoʻo a i ʻole nā ʻāpana i nā mīkini uila F-class, nā mea hoʻololi, nā mea hoʻololi kuapo, nā mea haki kaapuni a me nā lako uila. Hiki ke hoʻoheheʻe pololei ʻia ka UPGM i nā ʻano like ʻole a i ʻole nā ʻāpana kūkulu insulation.
Pae mānoanoa：2mm---60mm
Ka nui o ka pepa1020mm *2010mm, 1000mm *2000mm, 1220mm *2440mm a me nā mānoanoa a i ʻole nā nui i kūkākūkā ʻia
Waihoʻoluʻu nui: ʻulaʻula, keʻokeʻo a i ʻole nā kala ʻē aʻe i kūkākūkā ʻia
Ma waho aʻe o nā pepa laminated UPGM, hana pū mākou a hoʻolako i nā pepa EPGM 203, ua like ke ana o ka pepa me ko GPO-3. He melemele a ʻōmaʻomaʻo paha ke kala. E ʻoluʻolu e kelepona mai iaʻu no ka ʻike hou aku.
Nā Koina ʻenehana
helehelena
Pono kona ʻili e pālahalaha a laumania, ʻaʻohe ona pehu, wrinkles a i ʻole nā māwae, a pono hoʻi e kaʻawale mai nā kīnā liʻiliʻi ʻē aʻe e like me nā ʻōpala, nā decks a me nā waihoʻoluʻu like ʻole.
Maʻamau tka ʻeha a mehoʻomanawanui
| Mānoanoa Inoa (mm) | Ka hoʻomanawanui i ʻae ʻia (mm) | Mānoanoa Inoa (mm) | Ka hoʻomanawanui i ʻae ʻia (mm) | |
| 0.8 | +/-0.23 | 12 | +/-0.90 | |
| 1.0 | +/-0.23 | 14 | +/-1.00 | |
| 2.0 | +/-0.30 | 16 | +/-1.10 | |
| 3.0 | +/-0.35 | 20 | +/-1.30 | |
| 4.0 | +/-0.40 | 25 | +/-1.40 | |
| 5.0 | +/-0.55 | 30 | +/-1.45 | |
| 6.0 | +/-0.60 | 40 | +/-1.55 | |
| 8.0 | +/-0.70 | 50 | +/-1.75 | |
| 10.0 | +/-0.80 | 60 | +/-1.90 | |
| Nānā: No nā ʻāpana o ka mānoanoa ʻaʻole i helu ʻia ma kēia papa, ʻo ka ʻokoʻa i ʻae ʻia e like ia me ka mānoanoa nui aʻe e hiki mai ana. | ||||
Nā waiwai kino, mīkini a me nā uila
| Nā Waiwai | ʻĀpana | Waiwai maʻamau | Waiwai maʻamau | ʻAno hoʻāʻo | ||
| Ka nui o ka paʻa | g/cm3 | 1.65~1.95 | 1.8 | GB/T 1033.1-2008 | ||
| (ʻano hana A) | ||||||
| Ka omo ʻana o ka wai, ka mānoanoa o 3mm | % | ≤ 0.2 | 0.16 | ASTM D790-03 | ||
| Ikaika Flexural, kū pololei i nā laminations (Lightwise) | Ma ke kūlana maʻamau | MPa | ≥180 | 235 | ASTM D790-03 | |
| 130℃+/-2℃ | ≥100 | 144 | ||||
| Modulus Flexural, kū pololei i nā laminations (Lengthwise) | Ma ke kūlana maʻamau | MPa | - | 1.43 x 104 | ||
| 130℃+/-2℃ | - | 1.10 x 104 | ||||
| Ikaika Flexural, kū pololei i nā laminations (Lightwise) | Ka lōʻihi | MPa | ≥170 | 243 | GB/T 1449-2005 | |
| Keʻa | ≥150 | 240 | ||||
| Ka ikaika o ka hopena, e like me nā laminations | KJ/m2 | ≥40 | 83.1 | GB/T 1043.1-2008 | ||
| (Charpy, ʻaʻohe ʻoki) | ||||||
| Ka ikaika o ka hopena, e like me nā laminations | J/m | - | 921 | ASTM D256-06 | ||
| (ʻIzod, ʻoki ʻia) | ||||||
| Ikaika tensile | MPa | ≥150 | 165 | GB/T 1040.2-2006 | ||
| Modulus elasticity tensile | MPa | ≥1.5x104 | 1.7 x 104 | |||
| Ikaika tensile, kūlike me nā laminations | Ka lōʻihi | MPa | ≥55 | 165 | GB/T1447-2005 | |
| Keʻa | ≥55 | 168 | ||||
| Kūlike i nā laminations | MPa | - | 230 | ASTM D695-10 | ||
| Ikaika hoʻopili | ||||||
| ʻO ka ikaika dielectric, kū pololei i nā laminations (i loko o ka ʻaila transformer 25 # ma 90 ℃ +/-2 ℃, hoʻāʻo manawa pōkole, Φ25mm / Φ75mm cylindrical electrode) | KV/mm | ≥12 | 135 | IEC60243-1:2013 | ||
| Ka uila haki, kūlike me nā lanimations (i loko o 25 # ʻaila hoʻololi ma 90 ℃ +/-2 ℃, hoʻāʻo pōkole, Φ130mm / Φ130mm plate electrode) | KV | ≥35 | ＞100 | |||
| Ka ʻae ʻana pili (1MHz) | - | ≤ 4.8 | 4.54 | GB/T 1409-2006 | ||
| ʻO ke kumu hoʻoheheʻe dielectric （1MHz） | - | ≤ 0.03 | 1.49 x 10-2 | |||
| Ke kū'ē ʻana o ke aʻa | s | ≥180 | 187 | GB/T 1411-2002 | ||
| Ke kū'ē ʻana i ka hahai ʻana | CTI | V | ≥600 | CTI 600 | ||
| Alanui | GB/T 4207-2012 | |||||
| PTI | ≥600 | PTI 600 | ||||
| Ke kū'ē ʻana i ka pale ʻana | Ma ke kūlana maʻamau | Ω | ≥1.0x1013 | 5.4 x 1014 | GB/T 10064-2006 | |
| (Nā ʻelekole pine Taper) | Ma hope o 24 mau hola i loko o ka wai | ≥1.0x1012 | 2.5 x 1014 | |||
| Ka hiki ke lapalapa (ʻano hana kū) | Papa | V-0 | V-0 | UL94-2013 | ||
| Uea ʻālohilohi | - | - | GWIT:960/3.0 | GB/T5169.13-2006 | ||
| Paʻakikī Barcol | - | ≥ 55 | 60 | ASTM D2583-07 | ||
Nānā, Māka, Hoʻopili a me ka Mālama ʻana
1) Pono e hoʻāʻo ʻia kēlā me kēia pūʻulu ma mua o ka hoʻouna ʻana. Pono e komo pū nā mea nānā no ka Hoʻāʻo Maʻamau me ka Paukū 2.1, 2.2, a me ka Paukū 1 a me ka Paukū 3 o ka Papa 6 ma ka Paukū 2.3. Pono e nānā pākahi ʻia nā mea ma ka Paukū 2.1, 2.2.
2) E mālama ʻia nā pepa ma kahi i ʻoi aku ka mahana ma mua o 40℃, a e kau ʻia ma luna o kahi pā moe me ke kiʻekiʻe o 50mm a ʻoi aku paha. E mālama ʻia mai ke ahi, ka wela (nā mea hoʻomehana) a me ka lā pololei. ʻO ke ola mālama o nā pepa he 18 mahina mai ka lā o ka haʻalele ʻana i ka hale hana. Inā ʻoi aku ka lōʻihi o ka mālama ʻana ma mua o 18 mahina, hiki ke hoʻohana ʻia ka huahana ma hope o ka hoʻāʻo ʻia ʻana e kūpono.
Nā Manaʻo a me nā Mālama no ka lawelawe ʻana a me ka hoʻohana ʻana
1) Pono e hoʻopili ʻia ka wikiwiki kiʻekiʻe a me ka hohonu liʻiliʻi o ka ʻoki ʻana i ka wā e hana ai i ka mīkini ma muli o ka nāwaliwali o ka conductivity thermal o nā pepa.
2) ʻO ka mīkini ʻana a me ka ʻoki ʻana i kēia huahana e hoʻokuʻu i ka nui o ka lepo a me ka uahi. Pono e hana ʻia nā hana kūpono e hōʻoia i ka pae o ka lepo i loko o nā palena i ʻae ʻia i ka wā o ka hana. Manaʻo ʻia ka ea hoʻokuʻu kūloko a me ka hoʻohana ʻana i nā pale lepo/ʻāpana kūpono.
Palapala hōʻoia
